Evolution 4 -
Technalon® covers, made with Kimberly-Clark's Evolution® 4-layer non-woven polypropylene fabric, provide maximum protection in all weather conditions. Often imitated, but never equaled, U.S. made Evolution fabric covers are used by millions of satisfied car enthusiasts around the world.
Recent improvements include a stronger outer layer and softer inner layer. The inner layer is constructed with similar processes used for the Dustop™ interior storage covers - gentle protection for fine paint finishes (inner layer is now light gray). Through extensive testing in Florida K-C has confirmed Evolution has the highest UPF rating of all their non-woven fabrics. This is important because UV rays are what damage both the exterior AND interior of any vehicle. Block the UV rays - protect the vehicle!
- Naturally Moisture Resistant - Acid rain, industrial pollutants, tree sap and bird droppings will not harm the fabric.
- Dries Easily - Moisture is not absorbed by the fabric fibers.
- Breathable - Allows air to circulate through the fabric.
- Dust / Pollution Barrier - The two middle layers of melt-blown fabric act as a filtration barrier against most airborne pollutants.
- Impact Absorption - 4-layer thickness absorbs impacts better than any other vehicle cover fabric to help protect the finish from nicks, dings, dents and scratches.
- Ready-Fit option - On a budget? Ready-Fit covers are also available in this custom fabric. Click the Ready-Fit Car Covers link to see color selection and pricing.
Noah - NOAH barrier fabric actually stops water, yet it "breathes" to allow any trapped moisture, seam seepage or condensation to easily evaporate. The unique construction process (patent pending) results in a cover with maximum all-weather protection...highly water resistant, dust resistant, UV resistant and breathable to make sure moisture and/or heat don't stay under the cover. Made in the U.S. by Kimberly-Clark, the fabric weighs only 4.75 oz./sq. yd., so it's easy to handle and fold.
Protective Outer Layers - A bi-component spunbond, using sheath-core technology. The inner core is polypropylene for strength, with a polyethylene wrap for softness. A silver-gray color was selected because of its heat-resistant properties. The fabric is also treated with UV inhibitors for extended outdoor use.
Micro-Porous Middle Layer - The barrier layer is breathable film, a proprietary stretch-film technology developed exclusively for Kimberly-Clark. The film is stretched and subjected to a chemical process that creates microscopic holes smaller than droplets of water or dust, yet large enough to allow moisture vapor to escape.
Soft, Paint-Protecting Inner Layer - A bi-component fabric made with polyethylene and nylon. This combination results in an exceptionally high strength-to-weight ratio, with the "soft touch" necessary for today's water-based paint finishes.
Sunbrella - Thanks to it's unique construction process Sunbrella provides protection, and years of service, in intense sun areas, like Arizona and other areas of the sun-belt, where UV rays will rapidly degrade the paint and interior. Because of the use of acrylic fibers, which are naturally UV resistant, Sunbrella has long been the recognized leader in long-wearing marine fabrics for bimni tops, sail covers and deck enclosures. Besides marine uses, Sunbrella is also used for commercial awnings due to it's ability in providing UV blockage with a rich, woven finish. The acrylic fibers are solution dyed, before the fabric is woven, to assure the color goes all the way through the fabric. Using a special finish process, the material is then softened for use as a car cover fabric. The fabric is exceptionally strong and coupled with it's UV resistance it also makes an excellent cover for RV's and trailers that spend extended time stored outside.
- Long Lasting Strength - Acrylic fibers suffer minimal loss of strength from exposure to heat, moisture and UV.
- Fade Resistant - Colors are a result of pigments which are actually built into the fibers (solution dyed), instead of just dying the finished fabric.
- Water Resistant - Treated for moisture resistance (but remember, this material is primarily for UV protection).
- Rot, Mildew Resistant - Acrylic fibers resist growth that occurs in moist environments.
Weathershield HP - How can you make a fabric that's been selected as an OE choice for luxury, high-performance and specialty vehicles and motorcycles better?
The worldwide patented EPIC by Nextec® finish helps shed moisture and stops dust, dirt and tree sap from reaching your vehicles finish. The fabric "breathes" to allow moisture, condensation and heat to easily escape from under the cover. The encapsulation technology goes INSIDE the fabric, around the fibers, resulting in a silky smooth finish that glides over fine paint finishes.
Nextec engineers have now married solution-dyed fibers to the EPIC finish in an environmentally friendly process that features much lower CO2 emissions! Also called "dope-dyeing" the high-performance polyamide fibers require no dyeing after weaving, saving water and energy consumption and slashing wastewater, a byproduct of traditional surface dye processing. Using solution-dyed fibers can save as much as 1,000 gallons of water for every 1,000 yards of fabric produced!
Color permanency is the key to the new WeatherShield®HP - the color is extruded INSIDE the fibers for maximum fade resistance, NOT a surface dye coating. The result is a cover that's provides all-weather protection, machine washable, fade resistant AND environmentally friendly!
Weathersheild HD - Developed primarily for intense sun environments and long-term storage, WeatherShield HD not only provides UV opacity, it repels water, blocks dust, tree sap and bird droppings, and is still breathable to allow moisture and heat to escape from under the cover.
The base material for WeatherShield HD is woven by Glen Raven Mills (makers of Sunbrella®), using solution dyed UV resistant polyester fibers. Not only is the fabric solution dyed, the 300 denier construction is 40% heavier than regular WeatherShield and the heavier denier thread provides double the tear and tensile strength.
This superior base fabric is then finished with a patented immersion encapsulation process...the same high performance finish used on our popular WeatherShield fabric. Using proprietary processes a specially formulated finish is placed inside the fabric to bond to each individual thread and fill the valleys between the woven fibers (see close-up at left). These special formulas have amazing elasticity to block moisture and dirt, while still maintaining the breathability of the fabric.
200 Series Multibond -
Kimberly-Clark developed BLOCK-IT 200 Series fabric to be a mid-price leader in quality and performance. It uses 3-layer polypropylene construction for moisture and dust resistance, and the fibers are treated for extra UV resistance. If you are looking for an inexpensive cover for indoor storage and limited outdoor use, this U.S. made fabric offers good, basic protection and is an excellent value.
- Lightweight - Easy to use and less bulky for compact storage
- Soft & Non-Abrasive - Will not scratch clean paint or clear-coat.
- Breathable - Allows moisture and condensation to evaporate.
- Moisture, Mold & UV Resistant - Polypropylene fibers are naturally moisture resistant and treated for extra UV protection.
- Good Dust Protection - When used indoors, keeps vehicle cleaner than most woven fabrics.
- Ready-Fit option - On a budget? Ready-Fit covers are also available in this fabric. Click the Ready-Fit Car Covers link to see color selection and pricing.
380F Series Deluxe - 380 Series fabric is Kimberly-Clark's newest film barrier fabric, offering great performance at a competitive price. At 3.2 ounces per square yard it's about half the weight of the popular high-performance NOAH® fabric. The three-layer construction uses inner and outer layers of spunbond, sandwiching a middle layer protective film barrier. The film barrier has microscopic holes, smaller than droplets of water (and most dust particles) to stop moisture, but still allow any moisture vapor or heat to easily escape from under the cover.
- Naturally Moisture Resistant - Acid rain, industrial pollutants, tree sap and bird droppings will not harm the fabric.
- Breathable - Air easily circulates through the fabric to help it dry quickly and reduce heat build-up under cover.
- Dust / Pollution Barrier - The middle barrier layer acts as a filtration barrier against most airborne pollutants.
- Easy To Use - Won't shrink or stretch and retains it's tailored shape.
- Three (3) Year Limited Warranty - Against defects in workmanship and/or the fabric becoming unserviceable during normal use. Covercraft will repair or replace, to the original purchaser, after required inspection.
- Ready-Fit option - On a budget? Ready-Fit covers are also available in this custom fabric. Click the Ready-Fit Car Covers link to see color selection and pricing.
Form Fit -
Designed for cars that are not daily drivers, Covercraft's new Form-Fit covers provide a body-hugging fit AND a super soft inside to pamper fine paint finishes.
Covercraft starts with an outer shell of woven polyester that has Lycra/Spandex® added to the yarns to provide STRETCH and memory - the stretch provides the body-hugging fit and the memory assures the cover will retain its shape over an extended period of time (they have a 4-year warranty).
The inside fibers are 100% cotton terry loop which is sheared to a fleece-like finish. The end result is a 7.4 oz sq. yd. material that has a great "hand", or feel.
This cover will provide some ding & dent protection for a garage parked vehicle and the fabric is highly breathable to prevent vapor and heat from becoming trapped under the cover. Form-Fit covers are available in six (6) colors.
Since these covers require special patterns, applications are limited. Check for availability. Covers are supplied complete with a matching fabric storage bag.
Dustop - 
Made in the U.S., by Kimberly-Clark, this flannel-like fabric is a 4-layer non-woven composite, ultrasonically laminated to provide a high degree of dust protection during inside storage, while remaining breathable and soft against any fine paint finish. Maximum dust protection, yet it's lighter and easier to handle, compared to traditional woven fabrics.
- Soft But Strong Outer Layers - The two top layers are constructed of a polypropylene / polyethylene composite spunbond. These layers take advantage of the best features of both polymers: the superior softness of polyethylene, with the strength and stability of polypropylene.
- Dust Barrier - A melt-blown polypropylene layer serves as a barrier to most dust, dirt and pollution. Dustop's multi-layer construction provides substantially better dust protection when compared to traditional woven, single layer fabrics.
- Softest, Paint Protecting Inner Layer - The high-loft polypropylene / polyethylene inner layer pampers and protects the vehicle's finish. (These are the same materials designed by Kimberly-Clark for some of their softest baby diaper applications, and if it's soft enough for a baby's skin you know it's soft against the vehicle finish.)
Tan Flannel -
Favored by traditional enthusiast, tan flannel always provides a soft touch to pamper fine paint finishes. Designed primarily for indoor storage use, this woven cover is constructed from a durable polycotton blend.
- Flannel Underside - Soft, napped finish.
- Long Wearing - Over 50% heavier than Covercraft's gray polycotton fabric.
- Breathable - Allows moisture to evaporate and will not trap heat under cover.
- Water Resistant - Treated for moisture repellency.
- Rot, Mildew Resistant - Treated to resist rot and mildew.
Polycotton - Durable, woven polycotton blend offers good basic vehicle protection. Polyester is sun and water resistant, while cotton gives a soft touch to the vehicle's finish.
Drill Weave Fabric - Resists tears and punctures.
Water Resistant - Treated for moisture repellency
Breathable - Allows evaporation of moisture and reduces heat build-up under the cover.
Rot, Mildew Resistant - Treated to resist rot and mildew
Covercraft pioneered the custom-fit car cover market over 40 years ago. Since that time they have amassed over 55,000 vehicle patterns and can produce a car cover to fit any car manufactured since the 1920's. Where some manufacturers may have one pattern to fit a particular year, make and model of vehicle, Covercraft will commonly have 2 or more car cover patterns to accommodate sub-models and various factory options.
