There is no alternative, available from any supplier, for this cover.

The face feels like lingerie. The material has Lycra fibers for stretch in both directions, mirroring every perfect contour of your vehicle. And the inner liner is the softest fleece found on any car cover - specially designed not to rub off on convertible tops. It is available in solid color designs, including Black, Steel Gray, Pearl White, Burgundy Red, Dark Blue, Fly Yellow, Tan, and Forest Green.

Triguard
For those who want the Coverking Custom Fit, but don't need protection from heavy weather, Triguard Custom Car Covers are a great choice. Triguard is a lightweight, three layer material which protects from dirt, dust, light water, bird droppings and other mild hazards. It is perfect for use in a garage or under a carport. Triguard is also treated with UV inhibitors, which helps it stand up to ultra-violet rays emitted by the sun. Although Triguard contains these UV inhibitors, it is not recommended for very sunny climates - Silverguard™ or Stormproof™ would be better options. Triguard covers are gray in color, and offered with licensed GM logos.

Triguard™ is a thin and lightweight fabric. The lightness makes it very easy to handle, but offers little protection from dings and scratches. If your vehicle is exposed to dings and scratches from pets, children or a crowded garage, we recommend Coverbond 4.

Coverbond 4
4 layers make Coverbond 4 a very thick and bulky Custom Car Cover. It is not suggested for daily users, or for people with large SUVs. However, the extra bulk helps to guard against minor nicks and dings, and even helps in light hail. Coverbond 4 is suggested for moderate weather or indoor use.

Mosom
Mosom™ is a three layer material. The outer layers are Spunbond Polyropylene, and the middle layer is a special micro-porus film. The middle film layer is an excellent rain barrier, while allowing for vapors to pass through. It is a great choice for all-round car cover use, suggested for most conditions except extreme sun, snow or ice - in which case we suggest Stormproof™. Mosom is a non-woven material, so in the unlikely event a rip occurs in the material, it will not run.

Mosom™ car covers are very breathable, almost as breathable as Stormproof™. If your vehicle is exposed to rain for long durations, Mosom™ or Stormproof™ are both excellent choices. If protection from light nicks, scratches and light hail is required, Coverbond 4 is the best choice.

Mosom™ is soft to the touch and won't scratch a vehicle finish (assuming the vehicle is clean when the cover is applied). Mosom™ is available in gray color, and offered with optional embroidery and officially licensed GM logos.

There are other materials on the market which have the same basic construction - a micro-porus film layer laminated to two layers of Spunbond Polypropylen. Coverking developed Mosom™ specifically for use as a car cover material, and has added the highest levels of U.V. inhibitors - which prevent degredation in sunny climates. Coverking tests all it's materials, including Mosom™, to be compatible with automotive paints and clear coats. Because Coverking is TS16949 and QS-9000 certified, all materials used for Custom Car Covers are tested and OEM approved.

Stormshield
Made by Guilford Mills, Stormshield is a unique polyester knitted Custom Car Cover fabric with a "peach fizz" lining. The lining adds extra softness and thickness. Stormshield is perfect for virtually all weather conditions. Stormshield is available in black, gray, blue, red, yellow and tan. In addition, two tone combinations are available with black sides and a color center.

Silverguard™
Silverguard™ is a 300 denier polyester material with a reflective and water resistant coating. It is a great choice for all-round car cover use, suggested for most conditions except extreme rain, snow or ice - in which case we suggest Stormproof™. 300 denier is a strong, heavy weave which will not rip or tear easily. The silver coating on Silverguard™ does an excellent job of reflecting sunlight, while keeping rain and animal droppings from damaging the vehicle finish.

Silverguard™ car covers are breathable, although not as breathable as Mosom™ or Stormproof™. If your vehicle is exposed to rain for long durations, Mosom™ or Stormproof™ are better car cover options. If protection from light nicks, scratches and light hail is required, Coverbond 4 is the best choice.

Silverguard™ is soft to the touch and won't scratch a vehicle finish (assuming the vehicle is clean when the cover is applied). Silverguard is available in silver color, and offered with optional embroidery and officially licensed GM logos.

Beware of materials which claim to be similar, but are only half the weight - 150 denier material is not suitable for car cover use. Coverking tests all it's materials, including Silverguard™, to be compatible with automotive paints and clear coats. Because Coverking is TS16949 and QS-9000 certified, all materials used for Custom Car Covers are tested and OEM approved.

Stormproof
The culmination of over 15 years of development, Stormproof™ material was designed by Coverking and made by one of the world's leading textile mills. It is the most waterproof yet breathable car cover material available. Stormproof™ car cover material exhibits outstanding sun and U.V. resistance, able to last for years in Arizona sun without fading. The micro-fiber base material is soft to the touch and won't scratch a car's paint - yet is rolls up into a very compact package for easy storage. Stormproof™ is available in colors, and also with licensed GM logos.

Stormproof™ is unique in the field of Custom Car Cover materials in that it is Untreated, Uncoated, and Unprocessed. Through Coverking's advanced textile engineering, Stormproof™ accomplishes the needs of a premium Car Cover material without the coatings which can easily wear off, the treatments which fade over time, and the processing which can be undone the first time it is exposed to water. Speak to somebody who has owned other "premium" Car Cover materials and you'll hear how the other Car Cover fabrics work as advertised for the first few months, but then degrade in their water resistance - the problem is that the treatments and coatings can wear off, scratch off, or simply wash off.

Stormproof™ is immune to this, because it is inherently water resistant. It has no coating, so it is very breathable. And the fibers have been designed to reflect UV rays, and be immune to the color fading caused by the harsh sun.

Stormproof™ is the only Car Cover material we can suggest for any climate or car cover need - it excels in every area except protection from dings and hail (in which case we recommend Coverbond 4). Stormproof™ will last for years, and compliment your vehicle with the exciting colors and two tone designs it is offered in.

For more information on Stormproof, visit the Coverking web site's Stormproof™ page.